Clear fault indication notification via front LEDs.
Ensures all fault conditions are clearly highlighted to operators.
Front panel/PC software configuration.
Provides flexibility throughout installation and operation.
Power save mode.
Ensures the battery maintains enough power at all times.
3-phase generator sensing.
Provides true generator sensing.
3-phase generator and mains (utility) sensing.
Provides true generator and mains (utility) sensing.
600 V ph-ph nominal system compatibility.
Provides global flexibility.
Configurable DC outputs (2).
Provides multiple installation options.
Configurable digital inputs (7).
Provides multiple installation options.
Configurable staged loading outputs.
Provides full generator load control.
Fuel and start outputs.
Provides multiple installation options.
Configurable event log (15).
Provides access to historical alarms and operational status.
DSE Configuration Suite PC Software.
Provides complete user-friendly configuration and easy-to-use high-level system control & monitoring.
Specification
DC SUPPLY
CONTINUOUS VOLTAGE RATING
8 V to 35 V Continuous
CRANKING DROPOUTS
Able to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries. LEDs and backlight will not be maintained during cranking.
MAXIMUM OPERATING CURRENT
85 mA at 12 V, 80 mA at 24 V
MAXIMUM STANDBY CURRENT
40 mA at 12 V, 45 mA at 24 V
MAXIMUM SLEEP CURRENT
35 mA at 12 V, 32 mA at 24 V
MAXIMUM DEEP SLEEP CURRENT
<10 uA at 12 V, <10 uA at 24 V
MAINS (UTILITY)
VOLTAGE RANGE
15 V to 415 V AC (Ph to N)
26 V to 719 V AC (Ph to Ph)
FREQUENCY RANGE
3.5 Hz to 75 Hz
OUTPUTS
OUTPUT A (FUEL)
10 A short term, 5 A continuous,
at DC supply voltage
OUTPUT B (START)
10 A short term, 5 A continuous,
at DC supply voltage
AUXILIARY OUTPUTs C & D
2 A DC at supply voltage
AUXILIARY OUTPUTS E & F
2 A DC at supply voltage
GENERATOR
VOLTAGE RANGE
15 V to 415 V AC (Ph to N)
26 V to 719 V AC (Ph to Ph)
FREQUENCY RANGE
3.5 Hz to 75 Hz
